Peg-perego John Deere Farm Tractor with Trailer User Manual download pdf (Page 5)

35), insert the axle prepared previously, and

hammer in fully.

15 • Separate the wheels and fit them by pressing

the wheel group down onto the base of the

trailer.

16 • Insert the red coupling into the hole on the

trailer (see figure).

17 • Couple the trailer onto the back of the tractor,

rotating the red lever. Figure 1: the trailer can

be uncoupled; figure 2: the trailer coupled.

WARNING:The trailer will hold a load weighing

up to 5 kg.

This product conforms to EN 71 the

safety standard for toys.

This vehicle is not intended for use

on streets, around traffic or parked

cars.

This product meets and/or exceeds

all ASTM TOY SAFETY STANDARDS,

including F 963, Consumer Toy

Safety Specifications.

MAINTENANCE AND CARE

• Regularly check the conditions of

the vehicle. In case of fault, do not

try to use the vehicle. For repair

use only original PEG PEREGO’s

spare parts.

• PEG PEREGO assumes no liability if

the product as been tampered

with.

• Do not leave vehicle near sources

of heat such as radiators, stoves,

fireplaces, etc.

• Protect vehicle from water, rain,

snow, etc.

• Periodically lubricate (with a light

weight oil) moving parts, such as

wheel bearings, steering linkages,

and chains at points of rotation or

where they come in contact.

• The vehicle’s surface can be

cleaned with a dampcloth. Do not

use abrasive cleaners.The cleaning

must be carried out by adults only.

• Never disassemble the vehicles

mechanisms unless authorized by

PEG PEREGO.

SAFETY

WARNING!

THE CAR MUST BE USED UNDER

ADULT SUPERVISION.

• Not suitable for children under the

age of 2 years.The small pieces

could be swallowed or inhaled.

• Never use the vehicle on steep

slopes, near steps or stairs, in the

middle of traffic or between

parked cars.

• Children should always wear shoes

when riding in or driving a ride-

in/ride-on vehicle.

• Do not allow children to place

their hands, feet or any part of

their body, clothing or other

articles near the moving parts

while vehicle is in operation.

• Never use gasoline or other

• PEG PEREGO® thanks you for choosing this

product. For over 50 years, PEG PEREGO has been

taking children for an outing: first with its famous

baby carriages and strollers, later with its pedal and

battery operated toy vehicles.

• Read this instruction manual carefully to learn the

use of the vehicle and to teach your child safe and

enjoyable driving.Please keep this manual for use

as a reference in the future.

• Our toys conform with the safety requirements

provided by the Council of the EEC, of the T.Ü.V.; of

the I.I.S.G. Istituto Italiano Sicurezza Giocattoli, and

the U.S. Consumer Toy Safety Specification F963.

Peg Perego S.p.A. is an ISO 9001

certified company.

The fact that we are certified provides

a guarantee of our honesty for our

customers, and fosters trust in the

company’s way of working.

• Peg Perego reserves the right to modify or change

its product. Price, literature, manufacturing

processes or locations or any combination of the

above mentioned entities may change at any time

for any reason without notice with impunity.

Years 2-4

Weight capacity

50 lbs

PEG PEREGO offers after-sales services, directly or

through a network of authorized service centers for

repairs or replacement parts. See the back cover of

this instruction manual for contact information.

CAUTION:

ADULT ASSEMBLY REQUIRED.

USE CARE WHEN UNPACKING AS

COMPONENTS TO BE ASSEMBLED

MAY POSE A SMALL PARTS/SHARP

EDGE HAZARD.

ASSEMBLY

1 • Unscrew the 2 knobs under the seat.

2 • Position the seat as shown in the figure.

3 • IMPORTANT: the seat can be adjusted to 2

positions depending on the height of the child

(see figure). Position 1: the seat is higher and

further back. Position 2: the seat is lower and

further forward.

4 • Turn the vehicle on its side, keeping the seat in

position. Unscrew the chain cover under the

vehicle.

5 • Open the cover to access the seat fixing screws.

6 • Screw on the two seat fixing knobs as shown in

the figure. Close and screw on the cover.

7 • Position the steering wheel. Fix the steering

wheel with the screw and washer provided.

8 • Push on the steering wheel cap as shown in the

figure.

TRAILER

9 • Position the trailer base on the bucket, oriented

as shown.

10 • Snap on the 5 pegs, ensuring they are fully

inserted.

11 • Insert a self-locking washer into the conical tool

provided. IMPORTANT: the washer flanges must

be orientated towards the inside of the tool

(see detail A).

12 • Remove the axle from the packaging and

remove the protective caps, if present. Insert

the axle, hitting it with a hammer until fully

inserted into the tool.When finished remove

the tool.

13 • Slide the 2 wheels onto the axle.IMPORTANT:

check that the wheels are correctly inserted,

with the hub caps facing out.

14 • Put a self-locking washer into the tool (figure

ENGLISH

CUSTOMER SERVICE

ASSEMBLY INSTRUCTIONS

VEHICLE MAINTENANCE

AND SAFETY

flammable substances near the

vehicle.

• The vehicle is constructed just for

one child.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Peg-perego John Deere Farm Tractor with Trailer User Manual Page 5

Comments to this Manuals

Related products and manuals for Toys Peg-perego John Deere Farm Tractor with Trailer